From 184f1a0143945549bf173a4bab22563a3af769c6 Mon Sep 17 00:00:00 2001
From: alex <alex@pdp7.net>
Date: Sun, 26 Oct 2025 10:00:41 +0100
Subject: Migrate from freeswitch to flexisip

---
 .../modules/freeswitch/templates/switch.conf.xml   | 208 ----------
 .../puppet/modules/freeswitch/templates/vars.xml   | 448 ---------------------
 2 files changed, 656 deletions(-)
 delete mode 100644 personal_infra/puppet/modules/freeswitch/templates/switch.conf.xml
 delete mode 100644 personal_infra/puppet/modules/freeswitch/templates/vars.xml

(limited to 'personal_infra/puppet/modules/freeswitch/templates')

diff --git a/personal_infra/puppet/modules/freeswitch/templates/switch.conf.xml b/personal_infra/puppet/modules/freeswitch/templates/switch.conf.xml
deleted file mode 100644
index 36891f9b..00000000
--- a/personal_infra/puppet/modules/freeswitch/templates/switch.conf.xml
+++ /dev/null
@@ -1,208 +0,0 @@
-<configuration name="switch.conf" description="Core Configuration">
-
-  <cli-keybindings>
-    <key name="1" value="help"/>
-    <key name="2" value="status"/>
-    <key name="3" value="show channels"/>
-    <key name="4" value="show calls"/>
-    <key name="5" value="sofia status"/>
-    <key name="6" value="reloadxml"/>
-    <key name="7" value="console loglevel 0"/>
-    <key name="8" value="console loglevel 7"/>
-    <key name="9" value="sofia status profile internal"/>
-    <key name="10" value="sofia profile internal siptrace on"/>
-    <key name="11" value="sofia profile internal siptrace off"/>
-    <key name="12" value="version"/>
-  </cli-keybindings> 
-  
-  <default-ptimes>
-    <!-- Set this to override the 20ms assumption of various codecs in the sdp with no ptime defined -->
-    <!-- <codec name="G729" ptime="40"/> -->
-  </default-ptimes>
-  
-  <settings>
-    <!-- Colorize the Console -->
-    <param name="colorize-console" value="true"/>
-
-    <!--Include full timestamps in dialplan logs -->
-    <param name="dialplan-timestamps" value="false"/>
-
-    <!-- Run the timer at 20ms by default and drop down as needed unless you set 1m-timer=true which was previous default -->
-    <!-- <param name="1ms-timer" value="true"/> -->
-
-    <!--
-	Set the Switch Name for HA environments.
-	When setting the switch name, it will override the system hostname for all DB and CURL requests
-	allowing cluster environments such as RHCS to have identical FreeSWITCH configurations but run
-	as different hostnames.
-    -->
-    <!-- <param name="switchname" value="freeswitch"/> -->
-    <!-- <param name="cpu-idle-smoothing-depth" value="30"/> -->
-
-
-    <!-- Maximum number of simultaneous DB handles open -->
-    <param name="max-db-handles" value="50"/>
-    <!-- Maximum number of seconds to wait for a new DB handle before failing -->
-    <param name="db-handle-timeout" value="10"/>
-
-    <!-- Minimum idle CPU before refusing calls -->
-    <!-- <param name="min-idle-cpu" value="25"/> -->
-
-    <!-- Interval between heartbeat events -->
-    <!-- <param name="event-heartbeat-interval" value="20"/> -->
-
-    <!--
-	Max number of sessions to allow at any given time.
-	
-	NOTICE: If you're driving 28 T1's in a single box you should set this to 644*2 or 1288
-	this will ensure you're able to use the entire DS3 without a problem.  Otherwise you'll
-	be 144 channels short of always filling that DS3 up which can translate into waste.
-    -->
-    <param name="max-sessions" value="1000"/>
-    <!--Most channels to create per second -->
-    <param name="sessions-per-second" value="30"/>
-    <!-- Default Global Log Level - value is one of debug,info,notice,warning,err,crit,alert -->
-    <param name="loglevel" value="debug"/>
-
-    <!-- Set the core DEBUG level (0-10) -->
-    <!-- <param name="debug-level" value="10"/> -->
-
-    <!-- SQL Buffer length within rage of 32k to 10m -->
-    <!-- <param name="sql-buffer-len" value="1m"/> -->
-    <!-- Maximum SQL Buffer length must be greater than sql-buffer-len -->
-    <!-- <param name="max-sql-buffer-len" value="2m"/> -->
-
-    <!-- 
-	 The min-dtmf-duration specifies the minimum DTMF duration to use on 
-	 outgoing events. Events shorter than this will be increased in duration
-	 to match min_dtmf_duration. You cannot configure a dtmf duration on a 
-	 profile that is less than this setting. You may increase this value,
-	 but cannot set it lower than 400. This value cannot exceed 
-	 max-dtmf-duration. -->
-    <!-- <param name="min-dtmf-duration" value="400"/> -->
-
-    <!-- 
-	 The max-dtmf-duration caps the playout of a DTMF event at the specified
-	 duration. Events exceeding this duration will be truncated to this
-	 duration. You cannot configure a duration on a profile that exceeds
-	 this setting. This setting can be lowered, but cannot exceed 192000. 
-	 This setting cannot be set lower than min_dtmf_duration. -->
-    <!-- <param name="max-dtmf-duration" value="192000"/> -->
-
-    <!-- 
-	 The default_dtmf_duration specifies the DTMF duration to use on
-	 originated DTMF events or on events that are received without a
-	 duration specified. This value can be increased or lowered. This
-	 value is lower-bounded by min_dtmf_duration and upper-bounded by
-	 max-dtmf-duration\. -->
-    <!-- <param name="default-dtmf-duration" value="2000"/> -->
-
-    <!--
-	If you want to send out voicemail notifications via Windows you'll need to change the mailer-app
-	variable to the setting below:
-	
-	<param name="mailer-app" value="msmtp"/>
-	
-	Do not change mailer-app-args.
-	You will also need to download a sendmail clone for Windows (msmtp). This version works without issue:
-	http://msmtp.sourceforge.net/index.html. Download and copy the .exe to %winddir%\system32.
-	You'll need to create a small config file for smtp credentials (host name, authentication, tls, etc.) in
-	%USERPROFILE%\Application Data\ called "msmtprc.txt". Below is a sample copy of this file:
-	
-	###################################
-	# The SMTP server of the provider.
-	account provider
-	host smtp.myisp.com
-	from john@myisp.com
-	auth login
-	user johndoe
-	password mypassword
-	
-	# Set a default account
-	account default : provider
-	###################################
-	
-    -->    
-
-    <param name="mailer-app" value="sendmail"/>
-    <param name="mailer-app-args" value="-t"/>
-    <param name="dump-cores" value="yes"/>
-
-    <!-- Enable verbose channel events to include every detail about a channel on every event  -->
-    <!-- <param name="verbose-channel-events" value="no"/> -->
-
-    <!-- Enable clock nanosleep -->
-    <!-- <param name="enable-clock-nanosleep" value="true"/> -->
-
-    <!-- Enable monotonic timing -->
-    <!-- <param name="enable-monotonic-timing" value="true"/> -->
-
-    <!-- NEEDS DOCUMENTATION -->
-    <!-- <param name="enable-softtimer-timerfd" value="true"/> -->
-    <!-- <param name="enable-cond-yield" value="true"/> -->
-    <!-- <param name="enable-timer-matrix" value="true"/> -->
-    <!-- <param name="threaded-system-exec" value="true"/> -->
-    <!-- <param name="tipping-point" value="0"/> -->
-    <!-- <param name="timer-affinity" value="disabled"/> -->
-    <!-- NEEDS DOCUMENTATION -->
-
-    <!-- RTP port range -->
-    <param name="rtp-start-port" value="<%= @freeswitch_rtp_start_port %>"/>
-    <param name="rtp-end-port" value="<%= @freeswitch_rtp_end_port %>"/>
-
-    <!-- Test each port to make sure it is not in use by some other process before allocating it to RTP -->
-    <!-- <param name="rtp-port-usage-robustness" value="true"/> -->
-
-    <param name="rtp-enable-zrtp" value="false"/>
-
-    <!--
-	 Store encryption keys for secure media in channel variables and call CDRs. Default: false.
-	 WARNING: If true, anyone with CDR access can decrypt secure media!
-    -->
-    <!-- <param name="rtp-retain-crypto-keys" value="true"/> -->
-
-    <!--
-	 Native PostgreSQL support was removed from the FreeSWITCH Core!
-	 =================================
-	 NOTICE: You MUST enable mod_pgsql        
-	 =================================
-	 According to https://www.postgresql.org/docs/9.6/libpq-connect.html#LIBPQ-CONNSTRING
-	 There are two accepted formats for connection strings supported by the libpq library: 
-	 * For plain keyword = value strings use pgsql://
-	   pgsql://hostaddr=127.0.0.1 dbname=freeswitch user=freeswitch password='' options='-c client_min_messages=NOTICE'
-	 * For RFC 3986 URIs use postgresql:// or postgres://
-	   postgresql://
-	   postgresql://localhost
-	   postgresql://localhost:5433
-	   postgresql://localhost/mydb
-	   postgresql://user@localhost
-	   postgresql://user:secret@localhost
-	   postgresql://other@localhost/otherdb?connect_timeout=10&application_name=myapp
-	   postgresql:///mydb?host=localhost&port=5433
-    -->
-    <!-- <param name="core-db-dsn" value="pgsql://hostaddr=127.0.0.1 dbname=freeswitch user=freeswitch password='' options='-c client_min_messages=NOTICE'" /> -->
-    <!-- <param name="core-db-dsn" value="postgresql://freeswitch:@127.0.0.1/freeswitch?options=-c%20client_min_messages%3DNOTICE" /> -->
-    <!-- <param name="core-db-dsn" value="mariadb://Server=localhost;Database=freeswitch;Uid=freeswitch;Pwd=pass;" /> -->
-    <!-- <param name="core-db-dsn" value="dsn:username:password" /> -->
-    <!-- 
-	 Allow to specify the sqlite db at a different location (In this example, move it to ramdrive for
-	 better performance on most linux distro (note, you loose the data if you reboot))
-    -->
-    <!-- <param name="core-db-name" value="/dev/shm/core.db" /> -->
-
-    <!-- The system will create all the db schemas automatically, set this to false to avoid this behaviour -->
-    <!-- <param name="auto-create-schemas" value="true"/> -->
-    <!-- <param name="auto-clear-sql" value="true"/> -->
-    <!-- <param name="enable-early-hangup" value="true"/> -->
-
-    <!-- <param name="core-dbtype" value="MSSQL"/> -->
-
-    <!-- Allow multiple registrations to the same account in the central registration table -->
-    <!-- <param name="multiple-registrations" value="true"/> -->
-
-    <!-- <param name="max-audio-channels" value="2"/> -->
-
-  </settings>
-
-</configuration>
-
diff --git a/personal_infra/puppet/modules/freeswitch/templates/vars.xml b/personal_infra/puppet/modules/freeswitch/templates/vars.xml
deleted file mode 100644
index 850c0a17..00000000
--- a/personal_infra/puppet/modules/freeswitch/templates/vars.xml
+++ /dev/null
@@ -1,448 +0,0 @@
-<include>
-  <!-- Preprocessor Variables
-       These are introduced when configuration strings must be consistent across modules.
-       NOTICE: YOU CAN NOT COMMENT OUT AN X-PRE-PROCESS line, Remove the line instead.
-
-       WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
-
-       YOU SHOULD CHANGE THIS default_password value if you don't want to be subject to any
-       toll fraud in the future.  It's your responsibility to secure your own system.
-
-       This default config is used to demonstrate the feature set of FreeSWITCH.
-
-       WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
-  -->
-  <X-PRE-PROCESS cmd="set" data="default_password=<%= @freeswitch_password %>"/>
-  <!-- Did you change it yet? -->
-  <!--
-      The following variables are set dynamically - calculated if possible by freeswitch - and
-      are available to the config as $${variable}.  You can see their calculated value via fs_cli
-      by entering eval $${variable}
-
-      hostname
-      local_ip_v4
-      local_mask_v4
-      local_ip_v6
-      switch_serial
-      base_dir
-      recordings_dir
-      sound_prefix
-      sounds_dir
-      conf_dir
-      log_dir
-      run_dir
-      db_dir
-      mod_dir
-      htdocs_dir
-      script_dir
-      temp_dir
-      grammar_dir
-      certs_dir
-      storage_dir
-      cache_dir
-      core_uuid
-      zrtp_enabled
-      nat_public_addr
-      nat_private_addr
-      nat_type
-
-  -->
-
-
-  <X-PRE-PROCESS cmd="set" data="sound_prefix=$${sounds_dir}/en/us/callie"/>
-  <!--<Z-PRE-PROCESS cmd="set" data="sound_prefix=$${sounds_dir}/en/us/allison"/> -->
-
-  <!--
-      This setting is what sets the default domain FreeSWITCH will use if all else fails.
-
-      FreeSWICH will default to $${local_ip_v4} unless changed.  Changing this setting does
-      affect the sip authentication.  Please review conf/directory/default.xml for more
-      information on this topic.
-  -->
-  <X-PRE-PROCESS cmd="set" data="domain=sip.pdp7.net"/>
-  <X-PRE-PROCESS cmd="set" data="domain_name=$${domain}"/>
-  <X-PRE-PROCESS cmd="set" data="hold_music=local_stream://moh"/>
-  <X-PRE-PROCESS cmd="set" data="use_profile=external"/>
-  <X-PRE-PROCESS cmd="set" data="rtp_sdes_suites=AEAD_AES_256_GCM_8|AEAD_AES_128_GCM_8|AES_CM_256_HMAC_SHA1_80|AES_CM_192_HMAC_SHA1_80|AES_CM_128_HMAC_SHA1_80|AES_CM_256_HMAC_SHA1_32|AES_CM_192_HMAC_SHA1_32|AES_CM_128_HMAC_SHA1_32|AES_CM_128_NULL_AUTH"/>
-  <!--
-      Enable ZRTP globally you can override this on a per channel basis
-
-      http://wiki.freeswitch.org/wiki/ZRTP (on how to enable zrtp)
-  -->
-  <X-PRE-PROCESS cmd="set" data="zrtp_secure_media=true"/>
-  <!--
-      NOTICE: When using SRTP it's critical that you do not offer or accept
-      variable bit rate codecs, doing so would leak information and possibly
-      compromise your SRTP stream. (FS-6404)
-
-      Supported SRTP Crypto Suites:
-
-      AEAD_AES_256_GCM_8
-      ____________________________________________________________________________
-      This algorithm is identical to AEAD_AES_256_GCM (see Section 5.2 of
-      [RFC5116]), except that the tag length, t, is 8, and an
-      authentication tag with a length of 8 octets (64 bits) is used.
-      An AEAD_AES_256_GCM_8 ciphertext is exactly 8 octets longer than its
-      corresponding plaintext.
-
-
-      AEAD_AES_128_GCM_8
-      ____________________________________________________________________________
-      This algorithm is identical to AEAD_AES_128_GCM (see Section 5.1 of
-      [RFC5116]), except that the tag length, t, is 8, and an
-      authentication tag with a length of 8 octets (64 bits) is used.
-      An AEAD_AES_128_GCM_8 ciphertext is exactly 8 octets longer than its
-      corresponding plaintext.
-
-
-      AES_CM_256_HMAC_SHA1_80 | AES_CM_192_HMAC_SHA1_80 | AES_CM_128_HMAC_SHA1_80
-      ____________________________________________________________________________
-      AES_CM_128_HMAC_SHA1_80 is the SRTP default AES Counter Mode cipher
-      and HMAC-SHA1 message authentication with an 80-bit authentication
-      tag. The master-key length is 128 bits and has a default lifetime of
-      a maximum of 2^48 SRTP packets or 2^31 SRTCP packets, whichever comes
-      first.
-
-
-      AES_CM_256_HMAC_SHA1_32 | AES_CM_192_HMAC_SHA1_32 | AES_CM_128_HMAC_SHA1_32
-      ____________________________________________________________________________
-      This crypto-suite is identical to AES_CM_128_HMAC_SHA1_80 except that
-      the authentication tag is 32 bits. The length of the base64-decoded key and
-      salt value for this crypto-suite MUST be 30 octets i.e., 240 bits; otherwise,
-      the crypto attribute is considered invalid.
-
-
-      AES_CM_128_NULL_AUTH
-      ____________________________________________________________________________
-      The SRTP default cipher (AES-128 Counter Mode), but to use no authentication
-      method.  This policy is NOT RECOMMENDED unless it is unavoidable; see
-      Section 7.5 of [RFC3711].
-
-
-      SRTP variables that modify behaviors based on direction/leg:
-
-      rtp_secure_media
-      ____________________________________________________________________________
-      possible values:
-          mandatory - Accept/Offer SAVP negotiation ONLY
-          optional  - Accept/Offer SAVP/AVP with SAVP preferred
-          forbidden - More useful for inbound to deny SAVP negotiation
-          false     - implies forbidden
-          true      - implies mandatory
-
-      default if not set is accept SAVP inbound if offered.
-
-
-      rtp_secure_media_inbound | rtp_secure_media_outbound
-      ____________________________________________________________________________
-      This is the same as rtp_secure_media, but would apply to either inbound
-      or outbound offers specifically.
-
-
-      How to specify crypto suites:
-      ____________________________________________________________________________
-      By default without specifying any crypto suites FreeSWITCH will offer
-      crypto suites from strongest to weakest accepting the strongest each
-      endpoint has in common.  If you wish to force specific crypto suites you
-      can do so by appending the suites in a comma separated list in the order
-      that you wish to offer them in.
-
-      Examples:
-
-          rtp_secure_media=mandatory:AES_CM_256_HMAC_SHA1_80,AES_CM_256_HMAC_SHA1_32
-          rtp_secure_media=true:AES_CM_256_HMAC_SHA1_80,AES_CM_256_HMAC_SHA1_32
-          rtp_secure_media=optional:AES_CM_256_HMAC_SHA1_80
-          rtp_secure_media=true:AES_CM_256_HMAC_SHA1_80
-
-      Additionally you can narrow this down on either inbound or outbound by
-      specifying as so:
-
-          rtp_secure_media_inbound=true:AEAD_AES_256_GCM_8
-          rtp_secure_media_inbound=mandatory:AEAD_AES_256_GCM_8
-          rtp_secure_media_outbound=true:AEAD_AES_128_GCM_8
-          rtp_secure_media_outbound=optional:AEAD_AES_128_GCM_8
-
-
-      rtp_secure_media_suites
-      ____________________________________________________________________________
-      Optionaly you can use rtp_secure_media_suites to dictate the suite list
-      and only use rtp_secure_media=[optional|mandatory|false|true] without having
-      to dictate the suite list with the rtp_secure_media* variables.
-  -->
-  <!--
-       Examples of codec options: (module must be compiled and loaded)
-
-       codecname[@8000h|16000h|32000h[@XXi]]
-
-       XX is the frame size must be multples allowed for the codec
-       FreeSWITCH can support 10-120ms on some codecs.
-       We do not support exceeding the MTU of the RTP packet.
-
-
-       iLBC@30i         - iLBC using mode=30 which will win in all cases.
-       DVI4@8000h@20i   - IMA ADPCM 8kHz using 20ms ptime. (multiples of 10)
-       DVI4@16000h@40i  - IMA ADPCM 16kHz using 40ms ptime. (multiples of 10)
-       speex@8000h@20i  - Speex 8kHz using 20ms ptime.
-       speex@16000h@20i - Speex 16kHz using 20ms ptime.
-       speex@32000h@20i - Speex 32kHz using 20ms ptime.
-       BV16             - BroadVoice 16kb/s narrowband, 8kHz
-       BV32             - BroadVoice 32kb/s wideband, 16kHz
-       G7221@16000h     - G722.1 16kHz (aka Siren 7)
-       G7221@32000h     - G722.1C 32kHz (aka Siren 14)
-       CELT@32000h      - CELT 32kHz, only 10ms supported
-       CELT@48000h      - CELT 48kHz, only 10ms supported
-       GSM@40i          - GSM 8kHz using 40ms ptime. (GSM is done in multiples of 20, Default is 20ms)
-       G722             - G722 16kHz using default 20ms ptime. (multiples of 10)
-       PCMU             - G711 8kHz ulaw using default 20ms ptime. (multiples of 10)
-       PCMA             - G711 8kHz alaw using default 20ms ptime. (multiples of 10)
-       G726-16          - G726 16kbit adpcm using default 20ms ptime. (multiples of 10)
-       G726-24          - G726 24kbit adpcm using default 20ms ptime. (multiples of 10)
-       G726-32          - G726 32kbit adpcm using default 20ms ptime. (multiples of 10)
-       G726-40          - G726 40kbit adpcm using default 20ms ptime. (multiples of 10)
-       AAL2-G726-16     - Same as G726-16 but using AAL2 packing. (multiples of 10)
-       AAL2-G726-24     - Same as G726-24 but using AAL2 packing. (multiples of 10)
-       AAL2-G726-32     - Same as G726-32 but using AAL2 packing. (multiples of 10)
-       AAL2-G726-40     - Same as G726-40 but using AAL2 packing. (multiples of 10)
-       LPC              - LPC10 using 90ms ptime (only supports 90ms at this time in FreeSWITCH)
-       L16              - L16 isn't recommended for VoIP but you can do it. L16 can exceed the MTU rather quickly.
-
-       These are the passthru audio codecs:
-
-       G729             - G729 in passthru mode. (mod_g729)
-       G723             - G723.1 in passthru mode. (mod_g723_1)
-       AMR              - AMR in passthru mode. (mod_amr)
-
-       These are the passthru video codecs: (mod_h26x)
-
-       H261             - H.261 Video
-       H263             - H.263 Video
-       H263-1998        - H.263-1998 Video
-       H263-2000        - H.263-2000 Video
-       H264             - H.264 Video
-
-       RTP Dynamic Payload Numbers currently used in FreeSWITCH and their purpose.
-
-       96  - AMR
-       97  - iLBC (30)
-       98  - iLBC (20)
-       99  - Speex 8kHz, 16kHz, 32kHz
-       100 -
-       101 - telephone-event
-       102 -
-       103 -
-       104 -
-       105 -
-       106 - BV16
-       107 - G722.1 (16kHz)
-       108 -
-       109 -
-       110 -
-       111 -
-       112 -
-       113 -
-       114 - CELT 32kHz, 48kHz
-       115 - G722.1C (32kHz)
-       116 -
-       117 - SILK 8kHz
-       118 - SILK 12kHz
-       119 - SILK 16kHz
-       120 - SILK 24kHz
-       121 - AAL2-G726-40 && G726-40
-       122 - AAL2-G726-32 && G726-32
-       123 - AAL2-G726-24 && G726-24
-       124 - AAL2-G726-16 && G726-16
-       125 -
-       126 -
-       127 - BV32
-
-  -->
-  <X-PRE-PROCESS cmd="set" data="global_codec_prefs=OPUS,G722,PCMU,PCMA,H264,VP8"/>
-  <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=OPUS,G722,PCMU,PCMA,H264,VP8"/>
-
-  <!--
-      xmpp_client_profile and xmpp_server_profile
-      xmpp_client_profile can be any string.
-      xmpp_server_profile is appended to "dingaling_" to form the database name
-      containing the "subscriptions" table.
-      used by: dingaling.conf.xml enum.conf.xml
-  -->
-
-  <X-PRE-PROCESS cmd="set" data="xmpp_client_profile=xmppc"/>
-  <X-PRE-PROCESS cmd="set" data="xmpp_server_profile=xmpps"/>
-  <!--
-       THIS IS ONLY USED FOR DINGALING
-
-       bind_server_ip
-
-       Can be an ip address, a dns name, or "auto".
-       This determines an ip address available on this host to bind.
-       If you are separating RTP and SIP traffic, you will want to have
-       use different addresses where this variable appears.
-       Used by: dingaling.conf.xml
-  -->
-  <X-PRE-PROCESS cmd="set" data="bind_server_ip=auto"/>
-
-  <!-- NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE
-
-       If you're going to load test FreeSWITCH please input real IP addresses
-       for external_rtp_ip and external_sip_ip
-  -->
-
-  <!-- external_rtp_ip
-       Can be an one of:
-           ip address: "12.34.56.78"
-           a stun server lookup: "stun:stun.server.com"
-           a DNS name: "host:host.server.com"
-       where fs.mydomain.com is a DNS A record-useful when fs is on
-       a dynamic IP address, and uses a dynamic DNS updater.
-       If unspecified, the bind_server_ip value is used.
-       Used by: sofia.conf.xml dingaling.conf.xml
-  -->
-  <X-PRE-PROCESS cmd="stun-set" data="external_rtp_ip=<%= @freeswitch_address %>"/>
-
-  <!-- external_sip_ip
-      Used as the public IP address for SDP.
-       Can be an one of:
-           ip address: "12.34.56.78"
-           a stun server lookup: "stun:stun.server.com"
-           a DNS name: "host:host.server.com"
-       where fs.mydomain.com is a DNS A record-useful when fs is on
-       a dynamic IP address, and uses a dynamic DNS updater.
-       If unspecified, the bind_server_ip value is used.
-       Used by: sofia.conf.xml dingaling.conf.xml
-  -->
-  <X-PRE-PROCESS cmd="stun-set" data="external_sip_ip=<%= @freeswitch_address %>"/>
-
-  <!-- unroll-loops
-       Used to turn on sip loopback unrolling.
-  -->
-  <X-PRE-PROCESS cmd="set" data="unroll_loops=true"/>
-
-  <!-- outbound_caller_id and outbound_caller_name
-       The caller ID telephone number we should use when calling out.
-       Used by: conference.conf.xml and user directory for default
-       outbound callerid name and number.
-  -->
-  <X-PRE-PROCESS cmd="set" data="outbound_caller_name=FreeSWITCH"/>
-  <X-PRE-PROCESS cmd="set" data="outbound_caller_id=0000000000"/>
-
-  <!-- various debug and defaults -->
-  <X-PRE-PROCESS cmd="set" data="call_debug=false"/>
-  <X-PRE-PROCESS cmd="set" data="console_loglevel=info"/>
-  <X-PRE-PROCESS cmd="set" data="default_areacode=918"/>
-  <X-PRE-PROCESS cmd="set" data="default_country=US"/>
-
-  <!-- if false or undefined, the destination number is included in presence NOTIFY dm:note.
-       if true, the destination number is not included -->
-  <X-PRE-PROCESS cmd="set" data="presence_privacy=false"/>
-
-  <X-PRE-PROCESS cmd="set" data="au-ring=%(400,200,383,417);%(400,2000,383,417)"/>
-  <X-PRE-PROCESS cmd="set" data="be-ring=%(1000,3000,425)"/>
-  <X-PRE-PROCESS cmd="set" data="ca-ring=%(2000,4000,440,480)"/>
-  <X-PRE-PROCESS cmd="set" data="cn-ring=%(1000,4000,450)"/>
-  <X-PRE-PROCESS cmd="set" data="cy-ring=%(1500,3000,425)"/>
-  <X-PRE-PROCESS cmd="set" data="cz-ring=%(1000,4000,425)"/>
-  <X-PRE-PROCESS cmd="set" data="de-ring=%(1000,4000,425)"/>
-  <X-PRE-PROCESS cmd="set" data="dk-ring=%(1000,4000,425)"/>
-  <X-PRE-PROCESS cmd="set" data="dz-ring=%(1500,3500,425)"/>
-  <X-PRE-PROCESS cmd="set" data="eg-ring=%(2000,1000,475,375)"/>
-  <X-PRE-PROCESS cmd="set" data="es-ring=%(1500,3000,425)"/>
-  <X-PRE-PROCESS cmd="set" data="fi-ring=%(1000,4000,425)"/>
-  <X-PRE-PROCESS cmd="set" data="fr-ring=%(1500,3500,440)"/>
-  <X-PRE-PROCESS cmd="set" data="hk-ring=%(400,200,440,480);%(400,3000,440,480)"/>
-  <X-PRE-PROCESS cmd="set" data="hu-ring=%(1250,3750,425)"/>
-  <X-PRE-PROCESS cmd="set" data="il-ring=%(1000,3000,400)"/>
-  <X-PRE-PROCESS cmd="set" data="in-ring=%(400,200,425,375);%(400,2000,425,375)"/>
-  <X-PRE-PROCESS cmd="set" data="jp-ring=%(1000,2000,420,380)"/>
-  <X-PRE-PROCESS cmd="set" data="ko-ring=%(1000,2000,440,480)"/>
-  <X-PRE-PROCESS cmd="set" data="pk-ring=%(1000,2000,400)"/>
-  <X-PRE-PROCESS cmd="set" data="pl-ring=%(1000,4000,425)"/>
-  <X-PRE-PROCESS cmd="set" data="ro-ring=%(1850,4150,475,425)"/>
-  <X-PRE-PROCESS cmd="set" data="rs-ring=%(1000,4000,425)"/>
-  <X-PRE-PROCESS cmd="set" data="ru-ring=%(800,3200,425)"/>
-  <X-PRE-PROCESS cmd="set" data="sa-ring=%(1200,4600,425)"/>
-  <X-PRE-PROCESS cmd="set" data="tr-ring=%(2000,4000,450)"/>
-  <X-PRE-PROCESS cmd="set" data="uk-ring=%(400,200,400,450);%(400,2000,400,450)"/>
-  <X-PRE-PROCESS cmd="set" data="us-ring=%(2000,4000,440,480)"/>
-  <X-PRE-PROCESS cmd="set" data="bong-ring=v=-7;%(100,0,941.0,1477.0);v=-7;>=2;+=.1;%(1400,0,350,440)"/>
-  <X-PRE-PROCESS cmd="set" data="beep=%(1000,0,640)"/>
-  <X-PRE-PROCESS cmd="set" data="sit=%(274,0,913.8);%(274,0,1370.6);%(380,0,1776.7)"/>
-
-  <!--
-       Digits Dialed filter: (FS-6940)
-
-       The digits stream may contain valid credit card numbers or social security numbers, These digit
-       filters will allow you to make a valant effort to stamp out sensitive information for
-       PCI/HIPPA compliance. (see xml_cdr dialed_digits)
-
-       df_us_ssn   = US Social Security Number pattern
-       df_us_luhn  = Visa, MasterCard, American Express, Diners Club, Discover and JCB
-  -->
-  <X-PRE-PROCESS cmd="set" data="df_us_ssn=(?!219099999|078051120)(?!666|000|9\d{2})\d{3}(?!00)\d{2}(?!0{4})\d{4}"/>
-  <X-PRE-PROCESS cmd="set" data="df_luhn=?:4[0-9]{12}(?:[0-9]{3})?|5[1-5][0-9]{14}|3[47][0-9]{13}|3(?:0[0-5]|[68][0-9])[0-9]{11}|6(?:011|5[0-9]{2})[0-9]{12}|(?:2131|1800|35\d{3})\d{11}"/>
-  <!-- change XX to X below to enable -->
-  <XX-PRE-PROCESS cmd="set" data="digits_dialed_filter=(($${df_luhn})|($${df_us_ssn}))"/>
-
-  <!--
-      Setting up your default sip provider is easy.
-      Below are some values that should work in most cases.
-
-      These are for conf/directory/default/example.com.xml
-  -->
-  <X-PRE-PROCESS cmd="set" data="default_provider=example.com"/>
-  <X-PRE-PROCESS cmd="set" data="default_provider_username=joeuser"/>
-  <X-PRE-PROCESS cmd="set" data="default_provider_password=password"/>
-  <X-PRE-PROCESS cmd="set" data="default_provider_from_domain=example.com"/>
-  <!-- true or false -->
-  <X-PRE-PROCESS cmd="set" data="default_provider_register=false"/>
-  <X-PRE-PROCESS cmd="set" data="default_provider_contact=5000"/>
-
-  <!--
-     SIP and TLS settings. http://wiki.freeswitch.org/wiki/Tls
-
-     valid options: sslv2,sslv3,sslv23,tlsv1,tlsv1.1,tlsv1.2
-
-     default: tlsv1,tlsv1.1,tlsv1.2
-  -->
-  <X-PRE-PROCESS cmd="set" data="sip_tls_version=tlsv1,tlsv1.1,tlsv1.2"/>
-
-  <!--
-     TLS cipher suite: default ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH
-
-     The actual ciphers supported will change per platform.
-
-     openssl ciphers -v 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH'
-
-     Will show you what is available in your verion of openssl.
-  -->
-  <X-PRE-PROCESS cmd="set" data="sip_tls_ciphers=ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH"/>
-
-  <!-- Internal SIP Profile -->
-  <X-PRE-PROCESS cmd="set" data="internal_auth_calls=true"/>
-  <X-PRE-PROCESS cmd="set" data="internal_sip_port=5060"/>
-  <X-PRE-PROCESS cmd="set" data="internal_tls_port=5061"/>
-  <X-PRE-PROCESS cmd="set" data="internal_ssl_enable=true"/>
-
-  <!-- External SIP Profile -->
-  <X-PRE-PROCESS cmd="set" data="external_auth_calls=false"/>
-  <X-PRE-PROCESS cmd="set" data="external_sip_port=5080"/>
-  <X-PRE-PROCESS cmd="set" data="external_tls_port=5081"/>
-  <X-PRE-PROCESS cmd="set" data="external_ssl_enable=false"/>
-
-  <!-- Video Settings -->
-  <!-- Setting the max bandwdith -->
-  <X-PRE-PROCESS cmd="set" data="rtp_video_max_bandwidth_in=3mb"/>
-  <X-PRE-PROCESS cmd="set" data="rtp_video_max_bandwidth_out=3mb"/>
-
-  <!-- WebRTC Video -->
-  <!-- Suppress CNG for WebRTC Audio -->
-  <X-PRE-PROCESS cmd="set" data="suppress_cng=true"/>
-  <!-- Enable liberal DTMF for those that can't get it right -->
-  <X-PRE-PROCESS cmd="set" data="rtp_liberal_dtmf=true"/>
-  <!-- Helps with WebRTC Audio -->
-
-  <!-- Stock Video Avatars -->
-  <X-PRE-PROCESS cmd="set" data="video_mute_png=$${images_dir}/default-mute.png"/>
-  <X-PRE-PROCESS cmd="set" data="video_no_avatar_png=$${images_dir}/default-avatar.png"/>
-
-</include>
-- 
cgit v1.2.3